Foundation Repair in Richmond, TX
An older house near downtown or a newer slab with cracks? One call connects you with an independent foundation contractor who serves Richmond.
- Independent local contractors
- Free referral service
- No obligation
Is your address covered?
Enter your ZIP code in Richmond.
Local know-how
Foundation problems in Richmond
Richmond, the Fort Bend County seat, sits on the Brazos River, and its soils show it. USDA maps list Lake Charles clay (34 percent), Bernard clay loam (14 percent), Clemville silt loam (9 percent), Brazoria clay (9 percent) and Pledger clay (9 percent). About 65 percent of the city is rated high or very high for shrink-swell.
Few towns in the Houston area have a wider range of housing. Nearly half of Richmond’s homes (47 percent) were built before 1980, among them pier-and-beam houses in the old town, while about a third date from 2000 or later. Old houses on blocks or brick piers need re-leveling, new supports and dry crawl spaces; slabs on clay need even moisture and, when they have moved too far, piers.
Key facts: foundation repair in Richmond, TX
- How much does foundation repair cost in Richmond? We have no verified Richmond average, so we use nearby Houston: Angi lists an average of about $5,003, with most jobs between $3,276–$6,729. Pier jobs cost more: national guides put steel or concrete piers at about $1,000–$3,000 each, and a typical house needs several.
- Do I need a permit for foundation repair in Richmond, TX? Ask the city’s Building Department before work starts. Richmond requires contractors to be registered before they can pull building permits and does not publish a separate foundation repair checklist.
- Why is Richmond’s soil so active? Much of the city lies on clays laid down by the Brazos River and on coastal prairie clay. About 65 percent of the mapped area is rated high or very high for shrink-swell, led by Lake Charles clay.
- How to get connected: call the number on this page to reach an independent local foundation contractor who serves your ZIP code. No obligation.
Updated November 2026. Sources below; costs are published estimates, not quotes.
Soil and housing data for Richmond
| Measure | Richmond |
|---|---|
| Most common soils | Lake Charles clay (34%), Bernard clay loam (14%), Clemville silt loam (9%) |
| High or very high shrink-swell | 65% of the soil area |
| Moderate / low shrink-swell | 18% / 17% |
| Median year built | 1984 |
| Built before 1980 / since 2000 | 46% / 35% |
| Single-family detached | 47% of 5,063 homes |
City-wide figures (USDA soil survey, Census Bureau 2020–2024), not a single lot. Method and all cities.
Permits in Richmond
Richmond’s Building Department handles residential building permits, and the city requires contractors to be registered before they can pull building permits. It does not publish a separate foundation repair checklist. Ask the department what your repair needs, and whether a property near the river lies in a flood hazard area, which adds requirements.
Compare: foundation repair permit rules by city.
What foundation repair costs in Richmond
We have no verified Richmond average, so we use nearby Houston: Angi lists an average of about $5,003, with most jobs between $3,276–$6,729. Pier jobs cost more: national guides put steel or concrete piers at about $1,000–$3,000 each, and a typical house needs several. More detail: foundation repair cost in Houston.
Sources
- City of Richmond: Building Department
- University of Houston CIGMAT: Settlement of foundations on expansive clays
- Fort Bend Subsidence District: 2025 annual groundwater report, executive summary (PDF)
- Angi: How much does foundation repair cost in Houston, TX?
- This Old House: Foundation repair cost (national guide)
- Bob Vila: Foundation repair cost (national price ranges)
- USDA NRCS: Web Soil Survey (SSURGO data, retrieved November 2026)
- USDA NRCS: National Soil Survey Handbook, 618.42 (shrink-swell classes)
- U.S. Census Bureau: ACS 2020–2024, table B25034 (year built), Richmond city
How it works
Get help in three simple steps
Just call and talk to a real person – no forms, no waiting.
- Call usTell a specialist what you are seeing – cracks, sloping floors, sticking doors, a bowing wall – and where you live.
- Get matchedYou are connected with an independent, local foundation repair contractor who serves your ZIP code.
- Get it fixedThe contractor inspects your home, explains the repair options and gives you a price. You decide – no obligation.
2 ZIP codes in Richmond
77406, 77407
FAQ
Foundation Repair in Richmond
Nearby pages:
How much does foundation repair cost in Richmond?
We have no verified Richmond average, so we use nearby Houston: Angi lists an average of about $5,003, with most jobs between $3,276–$6,729. Pier jobs cost more: national guides put steel or concrete piers at about $1,000–$3,000 each, and a typical house needs several.
Do I need a permit for foundation repair in Richmond, TX?
Ask the city’s Building Department before work starts. Richmond requires contractors to be registered before they can pull building permits and does not publish a separate foundation repair checklist.
Why is Richmond’s soil so active?
Much of the city lies on clays laid down by the Brazos River and on coastal prairie clay. About 65 percent of the mapped area is rated high or very high for shrink-swell, led by Lake Charles clay.
Can an old pier-and-beam house in Richmond be leveled?
Usually, yes. Crews adjust or replace shims, piers and beams from the crawl space. Rotted wood, standing water and poor ventilation should be fixed at the same time so the floors stay level.
Foundation problems in Richmond?
Get connected with a local foundation contractor who knows the soil in your area.
- Independent, local foundation contractors
- Free referral service for homeowners
- No obligation to hire
One call connects you with an independent foundation contractor who serves your ZIP code.