Local foundation repair contractors in 16 states & DC · one call, no obligation
Get connected now(888) 417-3088
Foundation pros available in Fort Worth

Foundation Repair in Fort Worth & Tarrant County, TX

Fort Worth, Keller, North Richland Hills, Hurst, Euless, Bedford, Colleyville, Grapevine, Southlake, Roanoke, Argyle and Denton – North Texas clay under historic and brand-new homes alike.

  • Independent local contractors
  • Free referral service
  • No obligation

Is your address covered?

Enter your ZIP code or city in Fort Worth.

13+Communities served
20ZIP codes covered
6Common problems handled
1 callTo get connected

Local know-how

Why foundations move in Fort Worth

Tarrant County and the surrounding area share the same challenge as the rest of North Texas: clay soils that expand when they are wet and contract when they dry. On many lots the soil sits over limestone and marl, and the depth to stable ground varies from block to block, which is why local contractors adjust how deep piers are set.

Historic neighborhoods such as Fairmount, Arlington Heights and the Near Southside have many pier-and-beam homes that are now around a century old. New subdivisions on former ranch land north and west of the city are built on slabs, and cut-and-fill lots can settle unevenly in the first years.

Hot, dry summers followed by heavy storms are the typical trigger for new cracks. A contractor can tell you whether the problem is settlement, heave or a plumbing leak under the slab, which each need a different fix.

Key facts: foundation repair in Fort Worth & Tarrant County, TX

  • How much does foundation repair cost in Fort Worth? We have no verified Fort Worth average, so we use nearby Dallas: Angi lists an average of about $5,223, with most jobs between $3,338–$7,118. Slab piering is priced per pier, commonly $1,000–$3,000 each.
  • Why do some Fort Worth homes move more than others nearby? Tarrant County alternates between limestone and clay-rich marls like the Grayson Marl. Homes on thick clay move more than homes on shallow limestone.
  • How to get connected: call the number on this page to reach an independent local foundation contractor who serves your ZIP code. No obligation.

Updated November 2026. Sources below; costs are published estimates, not quotes.

Soil and housing data for the city of Fort Worth

More than half of the mapped soil area in the city of Fort Worth is rated high or very high for shrinking and swelling. That is the soil behavior behind most seasonal foundation movement: the ground shrinks in dry spells and swells again when it is wet.

Measurethe city of Fort Worth
Most common soilsSanger clay (20%), Aledo gravelly clay loam (15%), Frio silty clay (7%)
High or very high shrink-swell61% of the soil area
Moderate / low shrink-swell7% / 32%
Shallow soil over bedrock (under 20 inches)24%
Median year built1994
Built before 1980 / since 200034% / 43%
Single-family detached65% of 373,948 homes

City-wide figures (USDA soil survey, Census Bureau 2020–2024), not a single lot. Method and all cities.

Marl, limestone and clay under Tarrant County

Fort Worth sits on a layer cake of Cretaceous rock that geologists at the University of Texas’ Bureau of Economic Geology have mapped since the 1930s. Limestones such as the Fort Worth and Main Street Limestone alternate with clay-rich marls, and the Grayson Marl, described by the U.S. Geological Survey as mostly calcareous clay and marl, weathers into sticky clay soils. East and north toward Grapevine and Denton, the Woodbine Formation adds layers of sand and clay.

That variety matters for foundations. On marl and clay, soil shrinks in long, hot summers and swells after storms, and slab edges settle and heave. Where limestone is close to the surface, homes move less, but cut-and-fill lots on slopes can settle unevenly. Two houses a mile apart can need very different repairs, which is why local engineers want an elevation survey and often soil information before they design a pier plan.

Historic neighborhoods such as Fairmount, Arlington Heights and the Near Southside have pier-and-beam houses that are now around a century old. The Mid-Cities and northern Tarrant County, from Hurst, Euless and Bedford to Keller, Southlake and Colleyville, are dominated by slab homes built since the 1970s, many on graded lots.

Typical costs in Fort Worth

FigurePublished amount
Average job, nearby Dallas (Angi)about $5,223
Piers, per pier (national cost guides)$1,000 – $3,000

Published figures for orientation, not quotes. Multi-pier projects cost more than these averages; the contractor sets the price after an inspection.

Our Dallas–Fort Worth cost guide explains a typical quote line by line.

Engineer letters and permits

The City of Fort Worth’s residential remodel permit packet asks for engineered foundation plans and an engineer’s structural letter for foundation repairs, and the Development Services Department issues the permit. Denton requires an engineer-sealed repair letter and plan. Keller, Grapevine, Southlake and the other suburbs run their own permit offices with similar expectations. Texas has no statewide license for foundation repair companies, so the engineer’s documents and a written pier log are your best protection.

Pier-and-beam homes near downtown

Older Fort Worth houses often rest on concrete or brick piers with wood beams and shims. After decades, shims crush, piers tilt or sink, and floors slope toward the middle of the house. Re-shimming with steel, adding piers under long beam spans and replacing rotted sills are typical repairs, often combined with better crawl space ventilation and drainage. See pier and beam leveling for costs and methods.

Communities we cover

Partner contractors take calls from Fort Worth, Haltom City, North Richland Hills, Hurst, Euless, Bedford, Keller, Colleyville, Grapevine, Southlake, Roanoke, Argyle and Denton. Dallas and Collin County have their own page: foundation repair in Dallas. Enter your ZIP code above to check your address.

Keeping the repair stable

After a repair, the goal is to keep soil moisture around the slab more even. Extend downspouts, slope soil away from the house, keep large trees at a distance and fix leaks promptly. Many North Texas cities allow foundation watering with a soaker hose even during outdoor watering restrictions, but the rules differ, so check your city’s schedule. Our guide foundation watering in Texas explains when it helps and when it does not.

Soil and home age in nearby cities

CityHigh or very high shrink-swell soilMedian year builtHomes built before 1980
Haltom City69%197853%
North Richland Hills62%198635%
Denton57%199727%
Keller52%199910%
Grapevine52%199316%
Euless42%198632%
Bedford36%198338%
Hurst25%197560%
Southlake23%19975%
Colleyville18%199416%

Share of each city’s rated soil area (USDA NRCS soil survey) and Census Bureau housing estimates for 2020–2024. Method and all cities.

Sources

Local city pages

How it works

Get help in three simple steps

Just call and talk to a real person – no forms, no waiting.

  1. Call usTell a specialist what you are seeing – cracks, sloping floors, sticking doors, a bowing wall – and where you live.
  2. Get matchedYou are connected with an independent, local foundation repair contractor who serves your ZIP code.
  3. Get it fixedThe contractor inspects your home, explains the repair options and gives you a price. You decide – no obligation.

Service area

Communities we serve in Fort Worth

Partner contractors take calls from homeowners across the Fort Worth area, including:

Show all 20 ZIP codes served

76021, 76022, 76034, 76039, 76040, 76051, 76053, 76054, 76092, 76117, 76118, 76148, 76155, 76180, 76182, 76210, 76226, 76244, 76248, 76262

Do you serve Keller, Southlake and Grapevine?

Yes. Many ZIP codes in northeast Tarrant County, including Keller, Southlake, Colleyville and Grapevine, plus Denton, are covered. Enter your ZIP code to check your address.

How much does foundation repair cost in Fort Worth?

We have no verified Fort Worth average, so we use nearby Dallas: Angi lists an average of about $5,223, with most jobs between $3,338–$7,118. Slab piering is priced per pier, commonly $1,000–$3,000 each.

Does Fort Worth require an engineer for foundation repair?

Fort Worth’s residential permit packet asks for engineered foundation plans and an engineer’s structural letter for foundation repairs.

Why do some Fort Worth homes move more than others nearby?

Tarrant County alternates between limestone and clay-rich marls like the Grayson Marl. Homes on thick clay move more than homes on shallow limestone.

Do new homes in Fort Worth get foundation problems?

They can. New homes on expansive clay or on graded cut-and-fill lots may settle unevenly in the first years. If you see growing cracks, have the foundation inspected and check what your builder warranty covers.

Can you help with old pier-and-beam houses near downtown?

Yes. Partner contractors re-shim and replace supports, add piers and fix sagging beams in older pier-and-beam homes.

Foundation problems in Fort Worth?

Get connected with a local foundation contractor who knows the soil in your area.

  • Independent, local foundation contractors
  • Free referral service for homeowners
  • No obligation to hire
Get connected now(888) 417-3088

One call connects you with an independent foundation contractor who serves your ZIP code.

Tap to get connected now(888) 417-3088