Foundation Repair in Matthews, NC
Sagging floors, cracked brick or a crawl space with standing water? One call connects you with an independent foundation contractor who serves Matthews.
- Independent local contractors
- Free referral service
- No obligation
Is your address covered?
Enter your ZIP code in Matthews.
Local know-how
Foundation problems in Matthews
Matthews is a suburb of single-family homes southeast of Charlotte, most built in the 1980s and 1990s (median year 1994). USDA soil maps show Cecil sandy clay loam under 64 percent of the town, with Helena sandy loam and Enon fine sandy loam next, and rate 82 percent of the area low for shrink-swell and 18 percent moderate.
Crawl spaces are common here. After 30 or 40 years, the vapor barrier is torn, the vents no longer do their job and wood near the ground is damp. Piers settle a little, girders sag and floors slope toward the middle of the house. Helena and Enon soils, where they occur, add seasonal movement because their clay subsoil holds water.
Key facts: foundation repair in Matthews, NC
- How much does foundation repair cost in Matthews? We have no verified Matthews average, so we use nearby Charlotte: Angi lists an average of about $7,586, with most jobs between $2,873–$12,299. Pier jobs cost more: national guides put steel or concrete piers at about $1,000–$3,000 each, and a typical house needs several.
- Do I need a permit for foundation repair in Matthews? Yes. Mecklenburg County Code Enforcement requires a permit for any project that involves structural elements, whatever the cost, and inspects foundation supports after they are installed.
- How is a sagging crawl-space floor fixed? By adding or rebuilding piers, reinforcing or replacing girders and correcting moisture. See crawl space moisture and sagging floors.
- How to get connected: call the number on this page to reach an independent local foundation contractor who serves your ZIP code. No obligation.
Updated November 2026. Sources below; costs are published estimates, not quotes.
Soil and housing data for Matthews
| Measure | Matthews |
|---|---|
| Most common soils | Cecil sandy clay loam (64%), Helena sandy loam (9%), Enon fine sandy loam (8%) |
| High or very high shrink-swell | 0% of the soil area |
| Moderate / low shrink-swell | 18% / 82% |
| Median year built | 1994 |
| Built before 1980 / since 2000 | 18% / 37% |
| Single-family detached | 62% of 12,588 homes |
City-wide figures (USDA soil survey, Census Bureau 2020–2024), not a single lot. Method and all cities.
Permits in Matthews
Building permits in Matthews come from Mecklenburg County Code Enforcement. According to the county, a project that involves structural elements needs a permit no matter what it costs, and the county’s residential inspection schedule includes a foundation inspection made after all foundation supports are installed. Check with the Town of Matthews about zoning first; homeowners who live in the house can pull certain permits online.
Compare: foundation repair permit rules by city.
What foundation repair costs in Matthews
We have no verified Matthews average, so we use nearby Charlotte: Angi lists an average of about $7,586, with most jobs between $2,873–$12,299. Pier jobs cost more: national guides put steel or concrete piers at about $1,000–$3,000 each, and a typical house needs several. More detail: the foundation repair cost guide.
Sources
- Mecklenburg County Code Enforcement: Permitting
- Transportation Research Board: Residual soils of the Piedmont and Blue Ridge
- Angi: How much does foundation repair cost in Charlotte, NC?
- This Old House: Foundation repair cost (national guide)
- Bob Vila: Foundation repair cost (national price ranges)
- USDA NRCS: Web Soil Survey (SSURGO data, retrieved November 2026)
- USDA NRCS: National Soil Survey Handbook, 618.42 (shrink-swell classes)
- U.S. Census Bureau: ACS 2020–2024, table B25034 (year built), Matthews town
How it works
Get help in three simple steps
Just call and talk to a real person – no forms, no waiting.
- Call usTell a specialist what you are seeing – cracks, sloping floors, sticking doors, a bowing wall – and where you live.
- Get matchedYou are connected with an independent, local foundation repair contractor who serves your ZIP code.
- Get it fixedThe contractor inspects your home, explains the repair options and gives you a price. You decide – no obligation.
2 ZIP codes in Matthews
28104, 28105
FAQ
Foundation Repair in Matthews
Nearby pages:
How much does foundation repair cost in Matthews?
We have no verified Matthews average, so we use nearby Charlotte: Angi lists an average of about $7,586, with most jobs between $2,873–$12,299. Pier jobs cost more: national guides put steel or concrete piers at about $1,000–$3,000 each, and a typical house needs several.
Do I need a permit for foundation repair in Matthews?
Yes. Mecklenburg County Code Enforcement requires a permit for any project that involves structural elements, whatever the cost, and inspects foundation supports after they are installed.
How is a sagging crawl-space floor fixed?
By adding or rebuilding piers, reinforcing or replacing girders and correcting moisture. See crawl space moisture and sagging floors.
Is Matthews soil expansive?
Mostly not: 82 percent of the area is rated low for shrink-swell and 18 percent moderate.
Foundation problems in Matthews?
Get connected with a local foundation contractor who knows the soil in your area.
- Independent, local foundation contractors
- Free referral service for homeowners
- No obligation to hire
One call connects you with an independent foundation contractor who serves your ZIP code.